CleanSystem Pro supplies carbon fiber and aluminum water-fed poles, telescopic poles and solar panel cleaning equipment to distributors, cleaning contractors and OEM buyers sourcing for the market in Brazil. Configurations range from 10FT-70FT reach depending on material and application.
Water-Fed Poles and Telescopic Poles
Pole requirements vary by job rather than by a single national specification: window and facade cleaning, pool maintenance, dusting and solar panel access all call for different length, material and tool-head combinations. Carbon fiber poles suit frequent, extended-reach work where weight and stiffness at full extension matter; aluminum poles remain a cost-effective option for routine, lower- and medium-reach work. See our carbon fiber vs aluminum comparison guide for the full decision framework before specifying a model.
Solar Panel Cleaning Equipment
Solar panel cleaning poles, brushes and pure-water systems are configured around the installed array’s access conditions and the module manufacturer’s cleaning instructions, not a generic specification. Confirm brush compatibility and water-delivery requirements for the specific module before ordering — see our solar panel cleaning system guide.
OEM and Private Label Supply
Distributors and cleaning equipment brands in Brazil can source customized configurations — pole length, clamp type, finish, tool interface, branding and packaging — through our OEM/ODM program. Our OEM manufacturing guide explains the specification, sample-approval and production-verification steps before a bulk order ships. See our packaging and shipping guide for what to confirm before requesting a freight quotation.
How does INMETRO certification work for imported equipment?
Brazil’s INMETRO scheme is the most demanding certification regime in Latin America and the one that most often delays a first shipment. For regulated product categories, conformity requires testing at a laboratory accredited within Brazil, issuance of a certificate by an OCP (Organismo de Certificação de Produtos), and — importantly — ongoing factory surveillance audits rather than a single one-off approval. Registration in the INMETRO database follows, and the certificate is tied to a specific manufacturer and model.
The practical consequence is scheduling. A foreign test report, including a CE or IEC report, cannot be substituted, and the audit component means the process cannot be compressed into the weeks before shipment. Confirm with the supplier and a Brazilian OCP whether the specific product falls into a regulated category before production begins, since discovering the requirement after goods are manufactured typically costs months.
Portuguese-language documentation, labelling and safety information is required for the Brazilian market. Technical documentation supplied only in English will not satisfy an inspection.
Why must supply voltage be confirmed by location in Brazil?
Brazil is the only major market covered here where mains voltage varies within the country. Some states, including São Paulo and Rio de Janeiro, operate at 127 V, while others — Brasília, much of the north-east, and Paraná among them — use 220 V, and a number of locations have both available in the same building. Frequency is 60 Hz nationwide.
This means a national specification is not sufficient. For a distributor serving customers in more than one state, a dual-voltage (127/220 V) unit avoids stocking two variants and avoids the field failures that follow when a 127 V machine is connected to a 220 V supply. Where a single-voltage unit is specified, confirm the voltage at the actual installation address rather than at state level.
The plug is the other Brazil-specific item: NBR 14136 (Type N) is the national standard and is uncommon anywhere else, so equipment configured for Argentina, Chile or Europe will not have a compatible plug fitted even where the voltage happens to match. Specify the plug explicitly on the purchase order.
What import procedures and costs apply?
Brazilian customs procedures are more document-intensive than most markets in the region, and import taxation is layered — import duty (II), IPI, PIS, COFINS and state-level ICMS apply in combination, with ICMS rates differing by state. The effective landed cost can therefore differ depending on which state the goods clear into, which is a planning consideration rather than a formality.
Sea freight from China commonly arrives at Santos, the largest port in Latin America, with Paranaguá, Itajaí and Suape also serving the market. Transit times on this route are long, so plan inventory accordingly. Where solid wood packaging is used, ISPM 15 treatment and marking applies — see our packaging and shipping guide.
What cleaning conditions apply across Brazil?
Brazil’s distributed solar capacity has grown rapidly, and much of it is rooftop rather than utility-scale, which changes access conditions and therefore pole length and brush specification compared with ground-mounted array work. Soiling is driven by agricultural dust in the interior, coastal salt deposition near the shore, and urban particulates in the major metropolitan areas, each on a different cycle.
Water hardness varies by supply source and is generally moderate in the major cities, which is less demanding on a purification stage than Gulf or Mediterranean supplies. Request a current analysis from the local utility for each service area and size DI capacity against that figure — see our solar panel cleaning brush and pole guide for specifying from measured site data. For broader regional context, see our South America market page.
Frequently asked questions
Can a CE or IEC test report be used for INMETRO certification?
No. For regulated product categories INMETRO requires testing at a laboratory accredited within Brazil, certification by a Brazilian OCP, and ongoing factory surveillance audits rather than a one-off approval. A foreign test report cannot be substituted. Because the audit component cannot be compressed, confirm whether your product falls into a regulated category before production begins rather than close to shipment.
Which voltage should equipment be specified for in Brazil?
It depends on the state, and sometimes on the specific building. São Paulo and Rio de Janeiro operate at 127 V while Brasília, much of the north-east and Paraná use 220 V, with some locations having both available. Frequency is 60 Hz nationwide. For a distributor serving multiple states, a dual-voltage 127/220 V unit avoids stocking two variants and avoids field failures.
Is the Brazilian plug type used anywhere else?
Rarely. Brazil uses NBR 14136 (Type N) as its national standard, which is uncommon elsewhere and differs from the plug types used by neighbouring countries. Equipment configured for Argentina, Chile or a European market will not have a compatible plug fitted even where the voltage happens to match, so the plug type must be stated explicitly on the purchase order.
Why does landed cost differ between Brazilian states?
Import taxation is layered, combining import duty (II), IPI, PIS and COFINS with state-level ICMS, and ICMS rates differ between states. The effective landed cost therefore depends in part on which state the goods clear into, so this should be treated as a planning consideration when choosing a port of entry rather than assumed to be uniform across the country.
How does rooftop solar affect equipment specification in Brazil?
Much of Brazil’s rapidly growing solar capacity is distributed rooftop rather than utility-scale, which changes access conditions and therefore the pole length and brush width needed compared with ground-mounted array work. Soiling drivers also differ by location — agricultural dust inland, salt deposition near the coast and urban particulates in metropolitan areas — so specify from measured site data rather than a national assumption.
Request a Configuration for Your Market
Tell us your required reach, application, tool head and quantity, and we will help configure a water-fed pole, telescopic pole or solar cleaning equipment package suited to your market in Brazil — request a quote.